Skip Navigation
Skip Navigation

인천교통공사 Incheon Transit Corporation

Using safeguarding equipment

  2. Using safeguarding equipment

How to use fire extinguishers

  1. STEP.01

    use fire extinguishers step1

    Fire extinguishers are installed on the end of the both passage way.

  2. STEP.02

    use fire extinguishers step2

    Take out the fire extinguisher after pulling out the belt which is fixed.

  3. STEP.03

    use fire extinguishers step3

    Hold the hand with your left hand and pull out the safety pin with your right forefinger.

  4. STEP.04

    use fire extinguishers step4

    Hold the nozzle and lead the hose towards the fire, with your back against the wind.

How to use fire hydrant

  1. Take the hose out

    Take the hose out image

    Open the fire hydrant box, take the hose out and spread it evenly up to the place of fire without twisting.

  2. Open the valve

    Open the valve image

    Open the fire hydrant valve gradually by rotating it left.

  3. Sprinkle water

    Sprinkle water image

    Take hold of the end of the hose with your hands, lead it towards the place of fire to put it out.

  • You need a minimum of two people, one for manipulating nozzles and the other one for manipulating valves and hoses.
  • When using the equipment be careful not to get the hose bent. And as the hose is quite heavy in rebound make sure you do not put your hose down in mid course and lose your grip.

How to use emergency intercom apparatus

  1. STEP.01

    use emergency intercom apparatus step1 photo

    Emergency intercom is installed on the front and back side of the right wall, of the each passage ways.

  2. STEP.02

    use emergency intercom apparatus step2 photo

    Pulling out the handle bar to open the box.

  3. STEP.03

    use emergency intercom apparatus step3 photo

    While lifting the intercom, take it out.

  4. STEP.04

    use emergency intercom apparatus step4 photo

    When you hear the train operator, notify the situation. If there is no response, It is connected with the control office automatically after about 10 seconds.